{"id":880,"date":"2020-11-30T20:38:42","date_gmt":"2020-11-30T18:38:42","guid":{"rendered":"https:\/\/www.henningandersen.com\/?p=880"},"modified":"2020-12-05T10:25:10","modified_gmt":"2020-12-05T08:25:10","slug":"toys-for-the-kids-at-the-golf-club-part-4","status":"publish","type":"post","link":"https:\/\/www.henningandersen.com\/?p=880","title":{"rendered":"Toys for the kids at the golf club – part 4"},"content":{"rendered":"\n

As you might have noticed, I’ve started to make toys for the local golf club<\/a>. \ud83d\ude42 <\/p>\n\n\n\n

The golf pro want’s to use the toys for the kids at the golf club to play with and I promised to make some toys for that purpose.<\/p>\n\n\n\n

For some time I’ve been thinking about how to make a loop in wood. I tried various ideas out but ended up with this simple version.<\/p>\n\n\n\n

\"Squirrel
Squirrel loop – another angle<\/figcaption><\/figure><\/div>\n\n\n\n

I started by cutting two circles in plywood for the sides of the loop and then cut the circles open. Then I made a long strip of Masonite 10 centimeters wide and cut a groove in both circles to hold the strip of Masonite.<\/p>\n\n\n\n

After applying glue to the grooves in both sides, putting it all together, and holding it with clamps, then I used brute force to turn the circle into a loop and clamped it to my workbench until the glue had dried. <\/p>\n\n\n\n

After the loop had dried I mounted it on a piece of plywood and contructed two ramps from plywood and Masonite. <\/p>\n\n\n\n

The two squirrels were cut on my ShapeOko 2 CNC machine. They aren’t really needed but I added them to make the toy look cute and fun to the kids.<\/p>\n\n\n\n